Calculated Industries Machinist Calc 4086 User Manual

Us e r 's GU i d e — 7
Weight and Volume Function Keys
g6
Tons — Enters or converts a weight or volume
value to tons.
g4
Pounds (lbs) — Enters or converts a weight or
volume value to pounds.
g3
Metric Tons (met tons) — Enters or converts a
weight or volume value to metric tons.
g2
Grams — Enters or converts a weight or volume
value to grams.
g1
Kilograms (kg) — Enters or converts a weight or
volume value to kilograms.
g0
Weight per Volume (wt/vol) — Stores a new
weight per volume as pounds per cubic foot or
other format as shown below. Default value is 490
pounds per cubic foot of steel.
● Pounds per cubic foot
● Pounds per cubic inch
● Metric tons per cubic meter
● Kilograms per cubic meter
Trigonometric Function Keys (NOT AVAILABLE ON MODEL 4086)
g#
Sine — Calculates the Sine of an entered degree or
unitless value.
ga
Arcsine (ArcSine) — Calculates the angle for the
entered or calculated Sine value.
gF
Cosine (Cos) — Calculates the Cosine of an
entered degree or unitless value.
gp
Arccosine (ArcCos) — Calculates the angle for the
entered or calculated Cosine value.
gc
Tangent (Tan) — Calculates the Tangent of an
entered degree or unitless value.
(cont'd)

Calculated Industries Machinist Calc 4086 Specifications

General

Brand	Calculated Industries
Model	Machinist Calc 4086
Category	Calculator
Language	English