41
UTOPIA OPERATING INSTRUCTIONS
AUDIO CONTROL (OPTIONAL WIRELESS SYSTEM ONLY)
The following applies to spas that have CALDERA wireless sound system installed:
When the sound system has been installed on the spa, the control panel can be used to control the music system. The following information demonstrates how to
navigate through the audio menu by using the spa’s main control panel.
AUDIO MENU
Once the sound system is installed, an AUDIO menu will be accessible from the Home screen.
To access the menu, press the soft button next to Audio on the Home screen.
TO TURN AUDIO SYSTEM ON/OFF
From the AUDIO menu:
•
Press the soft button next to Audio to turn the Sound System on or off. Audio must be ON to advance the audio screens.
IMPORTANT: The power can take a few seconds to turn on or off.
TO ADJUST VOLUME
From the AUDIO menu:
• Press the soft button next to ▲ or ▼ to change the volume level.
• Press the Function:SET soft button to advance to the Play/Pause function screen.
NOTE: Volume range is from 0-40. No number displayed indicates Volume is OFF
TO PAUSE/PLAY (SONG)
From the AUDIO menu:
• Press the Function:SET soft button to advance to the Play/Pause function screen.
• Press the soft button next to PLAY/PAUSE (top right corner) to play or pause music.
TO CHANGE TRACK (SONG)
From the AUDIO menu:
• Press the Function:SET soft button to advance to the Play/Pause function screen.
• Press the Function:PLAY Play/Pause soft button to advance to the Track function screen.
• Press the FORWARD or BACK soft buttons to change the track (song).
TO GO TO SETUP MENU
From the AUDIO menu:
• Press the Function:SET soft button to advance to the Play/Pause function screen.
• Press the Function:PLAY Play/Pause soft button to advance to the Track function screen.
• Press the Function:PLAY Track soft button to advance to the Setup function screen.
• Press the ENTER SETUP soft button to scroll to the SETUP SOURCE screen.
TO CHANGE AUDIO SOURCE
From the SETUP Source menu:
This Source screen illustrates the current audio source the spa is using, when using a wireless dock the IPod
®
source should be
used.
• Press ▲ or ▼ soft buttons to change the desired source: IPOD, TV, AUX or Bluetooth
®
.
To use the BLUETOOTH screen, your audio BLUETOOTH device must be paired with the spa. On your device, find My Spa. If you
do not see this on your device you may be too far away from spa. Pair your device and you will be ready to use the BLUETOOTH.
Audio must be On to use BLUETOOTH and only one paired BLUETOOTH device will work at a time.
To Next Page
Loading...
