CALIENT S320 Getting Started Guide

S320 OCS Getting Started Guide
Doc. Part No. 460166-00
June 29, 2015
Rev. D10
32 of 42
3.4.4 Stopping and Starting Services
After configuring network settings, services on the switch must be stopped and
restarted in order for the changes to take effect.
3.4.4.1 Accessing the Stop-Start Service Script
The following procedure describes how to access the stop-start service script in order to
activate system changes:
1. Connect your computing device to the S320 OCS’s serial interface (Figure 8).
2. Log in to the system as:
root
3. Enter:
Target# gxc-stop
to stop system services.
4. Enter:
Target# gxc-start
to restart system services.
3.4.4.1.1 Stopping Services
Following is a sample screen display of the stop utility of the stop-start script, showing the user
login, stop command and summary of stopped services:
login as: root
root@gxc-S320 OCS:~# gxc-stop
SnmpServices [STOPPED]
PHPService [STOPPED]
WebServices [STOPPED]
TL1Service [STOPPED]
xConnectProvisioner [STOPPED]

CALIENT S320 Specifications

General

Brand	CALIENT
Model	S320
Category	Switch
Language	English