CALIENT S320 - INTRODUCTION

S320 OCS Getting Started Guide
Doc. Part No. 460166-00
June 29, 2015
Rev. D10
8 of 42
2.3.1 Unlocking the S320 OCS
The S320 OCS is unlocked by removing the shipping lockdown baseplate. Performing this task
requires two people. The following procedure describes how to remove the shipping lockdown
baseplate (Figure 1):
1. Person 1 presses down firmly on the shipping lockdown baseplate.
2. Person 2 carefully lifts the S320 OCS while Person 1 continues pressing down
on the baseplate.
As noted in section 2.2, be sure to retain the shipping lockdown baseplate, anti-ESD bag and
other materials included in the container for future shipment. The S320 OCS can only be
shipped using the original shipping lockdown baseplate and container.
Figure 1 – Shipping Lockdown Baseplate