S320 OCS Getting Started Guide
35 of 42
If a new password is set, make sure to keep a record of it. If a user-specified password
is lost or forgotten, it can only be reset by disrupting existing active connections and
traffic. If you do lose or forget your password, contact CALIENT Customer Service at
http://support.calient.net.
3.4.5.1.2 Web/TL1 Access
The S320 can also be accessed via a WebGUI (http://<switchip>) or TL1 by performing the
following steps:
1. Type the default username admin .
2. Type the default password pxc***.
The administrator can change the default user password (pxc***) anytime from the WebGUI by
performing the following steps:
1. Log into the system.
2. Click the Change Password button located in the upper-right corner of the Home Page.
The Change Password screen will appear.
To Next Page
Loading...
