Calix E7-2 User Manual

199
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
 8 Static IP hosts/subnets can be provisioned per xDSL port, across all services.
 256 Static addresses total per port (includes static addresses and sizes of static
subnets)
 16 DHCP Leases per port (defined in the Ethernet Security Profile with a default
setting of 8).
 IP and MAC addresses may be dynamically learned using either DHCP Snooping or
manually provisioned with static IP/MAC addresses. Services with static subnets
(without MAC address specification) may also be provisioned for IP Source Verification,
but are bound to the port only by IP address.
 DHCP and Static IP host: Binds IP and MAC address to an xDSL Port
 Static IP Subnet: Checks individual host IP addresses to the subnet and binds the
subnet to an xDSL port
Before starting
Before starting this procedure, you will need to provision a service on the xDSL port where
you want to configure the static IP host address or subnet.
Parameters for a static IP host address and subnet
Parameter
Description
Valid Options
Service* Name of the service to associate with an IP address. Any established service name
Type* IP address or hostname of the primary SIP configuration
server.
IP address, hostname
Static IP Host Address
IP Address* Static IP address for the ONT port service. IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
MAC Address L2 MAC address associated with the IP address. Six hexadecimal digits in the range 0-
FF, optionally separated by colons
Gateway* Address of the default gateway for subtending static IP
address objects.
IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
Net Mask* IP Netmask for subscriber host. IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
Static Subnet
Subnet Address* Subscriber IP address subnet. IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
Gateway* Address of the default gateway for subtending static IP
address objects.
IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
Subnet Mask* Subnet mask for subtending static IP address objects. IP address in dotted quad" format:
"192.168.1.100". Alternately, "none" can
be used to reset the value to "0.0.0.0"
*Required fields

Calix E7-2 Specifications

General

Brand	Calix
Model	E7-2
Category	Wireless Access Point
Language	English