Proprietary*Information:*Not*for*use*or*disclosure*except*by*written*agreement*with*Calix.*
"!#$%&'(!)%%!*&+,-.!*/./01/2(!
c.! In the Subnet Mask box, type a subnet mask for the in-band management port.
d.! In the Management VLAN box, type the VLAN ID number of the management
Note: You must specify an existing VLAN ID. If the VLAN does not exist, an error
message displays when you click Apply. Even if no E7-20 port interface is currently using
VLAN 1 as the Native VLAN, it is still off limits for user provisioning, including use as
EA! From the menu, click Apply to update the settings.
OA! Once a management VLAN is established, you can add E7-20 GE or 10GE port
interfaces to the management VLAN as required to enable in-band management over
those links. See Creating VLAN Memberships in the Calix E7 User Guide for instructions.
(A! On the Navigation Tree, click E7.
=A! In the work area, click System > Provisioning to define a default gateway for all E7-20
management traffic. Any received traffic with an unknown destination IP address will be
forwarded to the default gateway.
VA! For the IP Gateway box in the System Provisioning screen, enter the Gateway IP address
!! set mgmt-cfg [vlan|ip|netmask|admin-state]
To Next Page
Loading...
Need help?
General