EasyManua.ls Logo

Calorex Pro-Pac 45 - WARRANTY CONDITIONS

Calorex Pro-Pac 45
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The following exclusions apply to e Warranty given by Danerm Ltd. No
claims will be accepted if :
1. The heat pump is incorrectly sized for e application.
2. The heat pump is installed in any way at is not in accordance wi e
current procedures as defined by Danerm Ltd.
3. The heat pump has been worked upon or is adjusted by anyone oer
an a person auorised to do so by Danerm Ltd.
4. The air flow to and from e machine is outside e specified limits.
5. The water flow rough e machine is outside e specified limits.
6. The water pH level and/or chemical balance is outside e following limits:
7. The heat pump has suffered frost damage.
8. The electrical supply is insucient or in any way incorrect.
9. The fan amps and duct pressure are outside e specified limits.
10. The heat pump has not been maintained in accordance wi service
requirements in e regular planned maintenance section.
If in doubt or if advice is required please contact e Danerm Group
UK Service Department by calling 01621 856611 (option 4) or emailing
service.department@danerm.com
Note: The Reply Paid Warranty Registration Card must be returned, to ensure
at e correct warranty is given. If you do not find a Registration Card wi
your heat pump please contact e Danerm Group UK Service Department
giving your name, address and serial number of your heat pump. A card will be
sent to you for completion.
Please give MODEL NUMBER and SERIAL NUMBER of your heat pump when
making technical or service enquiries. This will assist in correct diagnosis and
ensure service can be provided wi e minimum delay.
Acidity pH pH 7.8 - 7.2
Total Alkalinity, as CaCO3 ppm 120 - 80
Total Hardness, as CaCO3 ppm 250 - 150
Total Dissolved Solids ppm 1000
Maximum Salt Content ppm 8000
Free Chlorine Range ppm Domestic 2 - 1
Free Chlorine Range ppm Commercial 6 - 3
Superchlorination max 30ppm for 24 hrs
Bromine ppm 5 - 2
Baquacil ppm 50 - 25
Ozone ppm Max 0.9
Maximum Copper Content ppm 1
Aquamatic Ionic Purifier ppm Max 2
12.0 WARRANTY CONDITIONS
48
SD566252 ISSUE 51
PR0-PAC SYSTEM OWNER INSTALLATION MANUAL

Table of Contents

Other manuals for Calorex Pro-Pac 45

Related product manuals