60
Check the PH
May appear on a regular schedule, i.e. every 7
days. Check pH with a test kit and adjust pH with
the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7
days. Check sanitizer level and other water chem-
istry with a test kit and adjust with the appropriate
chemicals.
Clean the lter
May appear on a regular schedule every 30 days.
Rinse the lter cartridge out and gently reinstall.
Test the GFCI
May appear every 30 days. The GFCI is an import-
ant safety device that should be tested to verify its
reliability.
Change the water
May appear every 90 days. A general recommen-
dation of draining the spa and using new water to
ensure water clarity and proper sanitation. This in-
terval is dependent on spa usage and bather load,
this interval might be shorter or longer. Spas with
heavy usage may require a water change every 30-
60 days, and spas with minimal usage may require
a water change every 90-120 days.
Clean the cover
May appear every 180 days. This reminder is to
remind you to clean your vinyl spa cover, and treat
the vinyl cover with a spa UV protectant. This will
ensure maximum life of your spa cover.
Change the lter
May appear on a regular schedule every 365
days. Filters when properly maintained should be
changed out every 365 days to maintain proper
sanitation.
Check ozone
May appear on a regular schedule. If your spa is
equipped with an ozone system, it is recommend-
ed to inspect the ozone generator once a year for
proper operation.
Change the UV
May appear on a regular schedule. The UV light
may need to be changed, contact your spa dealer
for service.
Service check - up
May appear on a regular schedule. This does not
indicate that the spa is encountering a problem.
This is just a reminder to inspect the operation
of your spa and to contact your spa dealer or the
manufacture if anything is not operating as
designed.
To Next Page
Loading...
