8
Depending on the type of spa, a piece of wood is placed on the side panels of the spa to protect it in shipping.
The wooden supports are installed with several ⁷/₁₆’’ (11mm) bolts, once the spa is in its nal resting place,
remove these with an 11mm socket.
Removing Shipping Materials
Your Cal Spa is wrapped with a white shrink wrap designed to protect the acrylic shell from scratches and
damage. Thoroughly inspect the plastic wrapping for any tears and or damage that may have occurred during
shipping. It is expected to see some scus or small tears at the base and corners of the spa, as the spa is
pushed and shifted around in transport.
Note: Do not use a box cutter or knife to remove this plastic wrapping, if a blade is used you may cut the
plastic wrapping at the bottom base of the spa, avoid slicing near the corners or the top of the spa.
To Next Page
Loading...
