Cambridge Audio Edge NQ Instructions

Edge NQ
5
Front panel controls
1
2
4
3
5
1. STANDBY/ON
Switches the unit between Standby mode (indicated by dim LED)
and On (indicated by bright LED). Standby mode is a low power
mode where the power consumption is less than 0.5 Watts. The unit
should be left in Standby mode when not in use.
AUTO POWER DOWN (APD)
This unit has an Auto Power Down function. The product will
automatically switch to standby mode after inactivity of 30 minutes.
To enable or disable this function, use the Edge app.
2. HEADPHONES
For suitable headphones – connection will automatically mute the
outputs.
3. DISPLAY
Displays the status of the unit.
4. IR SENSOR
Used for remote control.
5. VOLUME/SOURCE SELECTOR
To change the volume, rotate the front part. To select a source, rotate
the back part.

Cambridge Audio Edge NQ Specifications

General

Type	Network Player / Preamplifier
DAC	ESS Sabre ES9018K2M
Maximum Resolution Supported	32-bit/384kHz PCM, DSD256
Ethernet	Yes
Weight	10.2 kg (22.5 lbs)
Inputs	2x Coax S/PDIF, 2x TOSLINK Optical, 1x USB Audio, 1x XLR
Outputs	1x RCA, 1x XLR, 1x Coaxial S/PDIF, 1x TOSLINK Optical
Streaming Services	Chromecast, Spotify Connect, TIDAL, Qobuz, AirPlay, Internet Radio
File Formats Supported	FLAC, ALAC, WAV, AIFF, MP3, AAC, WMA, OGG, DSD
Wi-Fi	Yes (802.11 b/g/n/ac)
Bluetooth	Yes, aptX HD
USB Audio Input	Yes
Headphone Output	Yes, 6.3mm jack
Dimensions	120 x 460 x 405mm (4.7" x 18.1" x 15.9")