CAME F1024 - Mounting

Ø 8 mm
Ø 8 mm
Ø 14 mm
450 mm
19 mm
150 mm
M 8
M 8 x 110
Pag.
6
- Manual code:
119DU32EN
119 D U32EN ver.
3
3 12/2016 © CAME S.p.A. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME S.p.A. to notify users.
Mounting
- Secure the base plate to the pillar using ø8 screws and ø14 moulded inserts making sure the minimum distance of 150mm from
the ground is met.
- Secure the A bracket (using ø8 screws or by welding) to the gate leaf making sure the 450mm and 19mm distances measurements
and are met.
Front view
- Insert the gearmotor into the base plate and secure it using the two supplied M8x110 screws and M8 nuts.
Pillar
Bracket “A”