What to do if CAME Gate Opener photocells are engaged?
If the photocells on your CAME Gate Opener are engaged, ensure that they are clean and functioning correctly. If the issue persists, contact service.
General| Motor | 24 V DC |
|---|---|
| Max Gate Weight | 800 kg |
| Operating Temperature | -20°C to +55°C |
| Duty Cycle | 30% |
| Opening Speed | Adjustable |
| Safety Devices | Photocells, safety edges |
| Release | Manual |
| Control Options | Keypad |
| Power Supply | 230 V AC 50/60 Hz |
Product purpose, liability disclaimer, and advice to retain installation and operation manuals.
Essential checks on mechanical condition, alignment, and safety requirements before commencing installation.
Guidelines for site safety, handling heavy parts, placing commands, and ensuring proper installation practices.
Advises on keeping operational areas clear, child safety, and performing regular system checks for safety.
Emphasizes awareness of moving parts, hazardous points, and power disconnection for maintenance.
Instructions for preparing junction boxes, corrugated pipes, and drain pipes for cable management.
Steps for correctly positioning, aligning, and securing the foundation box before concrete pouring.
Explains the connection of the tie rod between the motor arm and arm unit using fasteners.
Notes that multiple holes on the arms allow for adjustment of gate opening angles.
Wiring diagram for connecting a three-phase 400V power supply to the control board.
Illustrates the star configuration for wiring the three-phase power supply.
Illustrates the delta configuration for wiring the three-phase power supply.
Guides on how to access and set the "end stop" function within the control panel menu.
Instructs to confirm that the "end stop" setting is correctly configured to Normally Closed (N.C.).
Mentions that multiple arm holes allow for adjustment of gate opening angles.
Step-by-step instructions for setting limit switches for gates with outward opening mechanisms.
To Next Page
