CAME FROG-MD - Maintenance Procedures and Logs; Dismantling, Disposal, and Compliance

Page
15
15 -
Manual code:
FA00598-EN
FA00598-EN ver.
1
1 05/2018
© CAME S.p.A. - The data and information provided in this manual are subject to change at any time without prior notice by CAME S.p.A.
Extraordinary maintenance log
Extraordinary maintenance
⚠
The table below is used to note any extraordinary maintenance, repairs or improvements carried out by specialist companies.
⚠
Extraordinary maintenance must be carried out by specialist technicians.
Date Notes Signature
Periodic maintenance
Periodic maintenance log to be completed by the user (every six months)
MAINTENANCE
☞
Before any maintenance, disconnect power to prevent any possible dangerous situations that can be caused by accidental movement of the operator.
Lubricate the pivot points with grease whenever abnormal vibrations or squeaking occurs, as shown below.
Installation technician stamp Operator name
Date of intervention
Technician signature
Customer signature
Intervention carried out _________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
DISMANTLING AND DISPOSAL
☞
CAME S.p.A. implements an EN ISO 14001-certified and compliant Environmental Management System at its plants, to ensure environmental protection.
Please continue our efforts to protect the environment, something that CAME considers to be one of the foundations in developing its business and market
strategies, simply by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING
Packaging components (cardboard, plastic, etc.) can be disposed of together with normal household waste without any difficulty, by simply separating the
different types of waste and recycling them.
Before proceeding, it is always advisable to check specific regulations in force in the place of installation.
DISPOSE OF PROPERLY!
DISPOSAL OF THE PRODUCT
Our products are made with different materials. Most of them (aluminium, plastic, iron, electrical cables) can be disposed of together with normal household
waste. They can be recycled if collected, sorted and sent to authorised centres.
Other components (control boards, transmitter batteries, etc.), on the other hand, may contain pollutants.
They should therefore be removed and handed over to companies authorised to recover and recycle them.
Before proceeding, it is always advisable to check specific regulations in force in the place of disposal.
DISPOSE OF PROPERLY!
DECLARATION OF CONFORMITY
The product complies to the reference regulations in e ect.
Installation technician stamp Operator name
Date of intervention
Technician signature
Customer signature
Intervention carried out _________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________