001G0502
001G05350
A
A
B
B
p. 13 - Manual FA00571-EN v. 1 - 08/2017- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
PASSAGE WIDTH CLEARANCE (m)
3 ÷ 3.5 3.5 ÷ 4 4 ÷ 4.5 4.5 ÷ 5
Boom AABB
Boom with swing-leg 001G02808 A B B A + B
Boom with luminous cord 001G28401 A B B A + B
Boom with 001G02808 swing rest and 001G28401 luminous cord B B A + B A + B
Boom with skirt 001G0465 A B A + B A + B
Boom with 001G0465 skirt and 001G028401 luminous cord B B A + B A + B
The boom includes the transparent groove cover and end cap.
⚠
WARNINGS!
001G02802 Cannot be used on barriers fitted with the 001G0465 skirt or 001G02808 swing rest
001G02807 MUST be used with passage widths exceeding 3 m.
001G0465 - 001G02808 Cannot be used together.
PASSAGE WIDTH CLEARANCE (m)
3 ÷ 4 4 ÷ 5
Boom AB
oom with 001G0465 skirt or 001G028401 swing-rest B A + B
Passage width clearance ( 5 m max.)
Passage width clearance ( 5 m max.)
BALANCING THE BOOM
The barrier is supplied with two Ø 50 mm springs (001G04060). The springs are fitted to the level arm (in holes B).
Depending on the final configuration of the barrier, you may have to exclude one of the springs or change the fastening position (see the
tables below).
⚠
When configuring the barrier, make sure the gearmotor is locked!
To Next Page
Loading...
