CAME G5000 - Boom Balancing Adjustment; Spring Traction Adjustment; Final Checks and Lubrication

45°
45°
p. 14 - Manual FA00571-EN v. 1 - 08/2017- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
Release the gearmotor and loosen the rod nut.
Manually turn the spring to increase or reduce the traction. The boom should stabilize at 45°.
Fit the nut to fasten the rod to the spring and tighten it.
Lock the gearmotor once again.
Check the proper working state of the spring.
With the boom raised vertically the spring is not taut.
With the boom lowered horizontally the spring is taut.
Warning! After performing balancing procedures, LUBRICATE THE SPRINGS WITH SPRAY GREASE!