CAME G5000 - Control Panel Overview; Fuse Specifications; Control Board Components

26V
0V
230
0
Rosso
Bianco
Blu
Arancione
p. 15 - Manual FA00571-EN v. 1 - 08/2017- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
CONTROL PANEL
⚠
Warning! Before working on the control panel, cut off the main power supply and, if present, remove any batteries.
Power supply to the control panel and control devices: 24 V AC/DC.
Functions on input and output contacts and time and user management details, are set up and viewable on the control panel's display.
All wiring connections are quick-fuse protected.
FUSE TABLE ZL39
- Line
3.15 A-F = 120 V
1.6 A-F = 230 V
- Card 1 A-F
- Accessories 2 A-F
DESCRIPTION OF PARTS
1. Transformer
2. Overheating protection terminals
3. Transformer terminals
4. Ferrite
5. Accessories fuse
6. Display
7. EMC01 filter
8. Terminals for transponder devices
9. Keypad selector terminal
10. Terminals for paired / alternate / CRP connections
11. Terminals for control and safety devices
12. Antenna terminal
13. AF card connector
14. RSE board connector
15. Connector for the R700 / R800 card
16. Programming buttons
17. Memory roll board connector
18. Programming warning LED
19. Power supply on warning LED
20. Control-board fuse
21. Line fuse
22. Power supply terminals
23. Terminals for gearmotor
24. Terminals for encoder