CAME G5000 - User Management; Registering Users; Deleting Users

ESC < > ENTER
2
2
ESC < > ENTER
2
U
ESC < > ENTER
C
L
ESC < > ENTER
I
ESC < > ENTER
I
U
ESC < > ENTER
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
1
0
11
1
2
1
3
1
4
1
5
1
6
17
1
8
19
2
0
2
1
2
2
2
3
2
4
2
5
p. 27 - Manual FA00571-EN v. 1 - 08/2017- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
DELETING SINGLE USERS
❶ Select U2 and press ENTER to confirm.
❷ Use the arrow keys select the number of the user you wish to delete. Press ENTER to confirm ...
❸ ... Clr will appear on the screen to confirm deletion.
MANAGING USERS
When adding/deleting users, the flashing numbers that appear, are numbers that can be used for other users you may wish to add
(maximum 25 users).
Before registering the users, make sure the AF radio-frequency card is fitted into the connector (see paragraph called CONTROL
DEVICES).
ENTERING A USER WITH AN ASSOCIATED COMMAND
❶ Select U1. Press ENTER to confirm.
❷ Select a command to associate to the user: The commands are:
- step-step (open-close) = 1;
- open = 3;
- partial opening/pedestrian = 4.
The partial/pedestrian opening command only appears if the F49 function is activated.
Press ENTER to confirm...
❸
.... a number between 1 and 25 will flash for some seconds. Send the code from the transmitter or other control device such as a
sensor, card reader or keypad selector.
If you want to add another command on the same transmitter, repeat the procedure and associated it on another button.
LIST OF REGISTERED USERS
Note down all registered users in the table below.