CAME G6000 User Manual

Page 11 - Manual FA01625-EN - 02/2023 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Changing the boom opening direction
The barrier is set up for installation on the left.
If the boom has already been assembled, lift it up to a vertical position and remove it.
Release the gearmotor using the key to run the procedure for changing the boom opening direction.

CAME G6000 Specifications

General

Brand	CAME
Model	G6000
Category	Control Systems
Language	English