CAME KIT AGT V + LITHOS - System Limits

Lb
La
VA/01
XDV/304
L1 L2 L3
MT M MT M MTM
N° Slave
N° Master
󱫔
N° Slave
Lb
La
Lc
Lithos
XDV/304
VAS/101
N° Master
󱫕
Page 5 - Manual FA01429-EN - 07/2020 - © CAME S.p.A. -The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
VCM/1D VCM/2D UTP/CAT 5
2 x 2.5
mm
2
La+Lb ≤100 m – ≤60 m –
L1, L2, L3 – ≤100 m – –
L1+L2+ L3 – ≤300 m – –
La + Lb + L1(L2, L3) ≤150 m
La + Lb + L1 + L2 + L3 ≤600 m
VCM/1D UTP CAT5
No. Master 4321321
No. Slave 4567067
VCM/1D UTP CAT5
No. Master 3211
No. Slave 0373
VCM/1D VCM/2D UTP/CAT 5 2x1mm
2
2 x 2.5 mm
2
La+Lb ≤100 m – ≤100 m – –
Lc – – – ≤25 m ≤60 m
La+Lb+Lc ≤100 m
System limits 󱫔󱫕
4 monitors can be switched on simultaneously only in one- or two- family systems with entry panel X1+VA/01.