CAME PST001 User Manual

#!.#%,,)!54/-!4)#)
#!.#%,,)!54/-!4)#)
1
2
1
2
Pag.
12
12 - Manual code:
119G3040
119G3040 ver.
1.5
1.5 09/2010 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Decoder boards for
transponders
LThe R700 boardscommand the turnstile with (TZP00/LT001) proximity sensors and the memory roll to save and load any settings
including registered users on another board
The R700 and Memory Roll boards must be inserted when the power is disconnected.
9.5 Decoder boards
Once the power is connected, wait 10 seconds before proceeding with any operations
Memory roll
9.6 Fixing the side casings and cover
1) Remount the side casing following the procedure given at point
6 on page 5 in reverse order.
2) Introduce the casings and screw them in place.
3) Introduce the top cover and connect the strap to the traffic
light.
IMPORTANT: before proceding with programming, make sure the electric cables are out of the way of the mechanical
parts.

CAME PST001 Specifications

General

Brand	CAME
Model	PST001
Category	Control Systems
Language	English