Page 4 - Manual FA01176-EN - 02/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Danger of high voltage;
Danger of crushing;
Danger of foot crushing;
Danger of hand entrapment;
Do not transit through during maneuvering.
what is stated in the markings on the gearmotor itself • Keep the section of this manual
inside the technical folder along with the manuals of all the other devices used for your
automation system. Remember to hand over to the end users all the operating manuals
of the products that make up the fi nal machinery.
The next fi gure shows the main hazard points for people.
Power supply cable replacement (Y connection)
If the power supply cable is damaged, it must be replaced by the manufacturer or authorized technical
assistance service, or in any case, by similarly qualifi ed persons, to prevent any risk
p. 4 -
Manual
FA01176-EN - 02/2019 - © CAME S.p.A. -
The contents of this manual may be changed, at any time, and without notice. - Original instructions
To Next Page
Loading...
Need help?
General
