Need help?Do you have a question about the CAME ZF1N and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | ZF1N |
| Category | Control Panel |
| Language | English |
Ensures solid mounting points, proper power cut-off devices, additional insulation, and protected cable routing.
Instructions for securely mounting the control panel using screws and dowels, avoiding damage to the board.
Guides on passing electrical cables through the cable gland with corrugated tubes.
Diagram and details for connecting the 120 V or 230 V AC input voltage to the control panel.
Wiring diagram for connecting Gearmotor M1 (120/230V AC), delayed when opening, to the control panel.
Wiring diagram for connecting Gearmotor M2 (120/230V AC), delayed when closing, to the control panel.
Details connection for a STOP button (NC contact) for stopping the gate and excluding auto-closing.
Input for safety devices like photocells. Describes reopening during closing and short-circuiting if unused.
Control board checks safety devices efficacy at each command. Anomalies inhibit commands. Enable via DIP-switch 3.
To Next Page
