CAME ZLX24MA - Data Transfer with Memory Roll; Data Import;Export Overview; Save Data to Memory Roll (F50); Read Data from Memory Roll (F51)

24 - Manual FA01796-IT - 04/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Import/export data
Save user data and system confi guration data on a MEMORY ROLL card.
The stored data can be used to carry across the same confi gurations to another control board.
You can only load and save data between control boards of the same type.
Before inserting and removing the MEMORY ROLL card, DISCONNECT THE MAINS POWER SUPPLY TO THE LINE.
1
Insert the MEMORY ROLL card into the
corresponding connector on the control board.
2
Press the “Enter” button to access
programming.
3
Use the arrows to choose the desired function.
The functions are displayed only when a MEMORY ROLL card is inserted.
F50 -Save data
Save user data, timings and confi gurations to the memory device (memory roll).
F51 -Read data
Upload user data, timings and confi gurations to the memory device (memory roll).
Once the data have been saved and loaded, the MEMORY ROLL can be removed.