Never use gasoline or other flammable liquids to clean the tool.
Never use the tool in the presence of flammable liquids or gases.
Vapors could ignite by a spark and cause an explosion which will
result in death or serious personal injury.
Do not remove, tamper with or otherwise cause the Work Contact
Element (WCE) or trigger to become inoperable. Do not operate any
tool which has been modified in a like fashion. Death or serious
personal injury could result.
Do not touch the trigger unless driving fasteners. Never attach a
pneumatic airline to the tool or carry tool while touching the
trigger. The tool could eject a fastener which will result in death or
serious personal injury.
Always disconnect the tool from the power source when unattended,
performing any maintenance or repair, clearing a jam, or moving the
tool to a new location.
To Next Page
Loading...
Need help?
General
