Always fit tool with a fitting or
hose coupling on or near the tool
in such a manner that all
compressed air in the tool is
discharged at the time the fitting
or hose coupling is disconnected.
Never carry the tool by the air hose
or pull the hose to move the tool
or a compressor.
Always assume the tool contains fasteners. Respect the tool as a
working implement; no horseplay.
Always keep others at a safe distance from the work area in case of
accidental discharge of fasteners.
Always reconnect the air line before loading any fasteners when
either the trigger is depressed or the work contact element (WCE) is
engaged. The tool could eject a fastener causing death or serious
personal injury.
To Next Page
Loading...
Need help?
General
