Can-Am DS70 - Oil Change

MAINTENANCE PROCEDURES
Oil Viscosity Chart
SAE 5W 40 (XP-S 5W 40 Synthetic Oil)
SAE 0W 30
SAE 5W 30
(XP-S 5W 30 Mineral Oil)
SAE 10W 30
SAE 10W 40
(XP-S 10W 40 Mineral Oil)
SAE 15W 40
SAE 20W 50
Temperature Range
50°C (122°F)
40°C (104°F)
30°C (86°F)
20°C (68°F)
10°C (50°F)
0°C (32°F)
- 10°C (14°F)
- 20°C (- 4°F)
- 30°C (- 22°F)
Oil Change
Oil change should be done with a warm
engine.
WARNING
The engine oil can be very hot.
Wait until engine oil is warm.
Ensure vehicle is on a level surface.
Remove dipstick.
vmo2008-008-021_a
TYPICAL — RH SIDE OF ENGINE
1. Dipstick
Clean the drain plug area.
Place a drain pan under the engine
drainplugarea.
Unscrew drain plug.
vmo2008-008-044_a
LH SIDE OF ENGINE
1. Drain plug
Allow enough time for oil to flow out of
engine.
Remove oil strainer and spring for
cleaning if necessary, refer to
MAIN-
TENANCE SCHEDULE for details.
82
______________________