Can-Am DS70 - Air Filter Housing

MAINTENANCE PROCEDURES
Removal
mmo2008-008-053_a
REMOVE AIR FILTER BOX COVER
1. Screws
mmo2008-008-054_a
REMOVE AIR FILTER FROM HOUSING
1. Air filter
Cleaning
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside the air
filter housing.
Rinse the filter with warm water until
all cleaning solution disappears.
Then, let the filter dry completely.
When the filter is dried, re-oil with air fil-
ter oil (P/N 219 700 340) or an equiva-
lent.
Installation
Installation is the reverse of removal
procedure.
mmo2008-008-055_a
FILTER POSITION
1. Cover side
2. Housing side
Air FilterHousing
Air Filter Housing Draining
Periodically inspect air filter housing
drain tube for liquids water or deposits.
mmo2008-008-057_a
1. Air filter housing
2. Drain tube
NOTE: If vehicle is used in dusty area,
inspect more frequently than specified
in
MAINTENANCE SCHEDULE .
84
______________________