IMPORTANT NOTICE
IMPORTANT NOTICE
This bulletin must be used in conjunction with the check list enclosed i n the bag with the
OPERATOR’S
GUIDE
. Make sure that Spyder roadster
PRE DELIVERY CHECK LIST
is completed and signed.
WARNING
To obtain warranty coverage, pre-delivery procedures must be performed by an authorized BRP
Can-Am roadster dealer/distributor. Apply all necessary torques as indicated.
NOTE: The information and components/system descriptions contained in this document are correct at
the time of publication. BRP however, maintains a policy of continuous improvement of its products with-
out imposing upon itself any obligation to install them on products previously manufactured.
Due to late changes, there might be some differences between the manufactured product and the de-
scriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
The illustrations in this document show the typical construction of the different assemblies and may not
reproduce the full detail or exact shape of the parts. However, they represent parts that have the same
or similar function.
The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model-year service training.
Further information or inquiries should be directed to yo ur service representative and specific
SHOP MANUAL
sections.
Make sure the customer receives the
OPERATOR’S GUIDE
,
PREDELIVERY CHECK LIST
signed copy
and
SAFETY DVD
WARNING
Torque wrench tightening specifications must be strictly adhered to. Where sp ecified, install new
locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a locking device is impaired,
it must be renewed.
2 / 52 2014-1 PREDELIVERY
To Next Page
Loading...
Need help?
General
