Can-Am Spyder RT Series User Manual

UPDATE SUMMARY
UPDATE SUMMARY
This summary highlights updates to the Predelivery Inspection for MY2014. It does not supersede pro-
cedures detailed further in this publication.
IMPORTANT: Technicians should read and apply all procedures in this PDI bulletin a s applicable to model.
APPLICABLE TO UPDATE DESCRIPTION REFERENCE
Battery removal for charging moved
PARTS AND SUB-C
RATES
REMOVAL
Parts stored i
n different compartments for
shipping
PARTS CHECK
Vehicle uncrating sequence modified
UNCRATIN G
Front cargo m odule installation sequence
additions, m
odifications and sequence changes
PARTSTOBEINSTALLED
NEW radiator protector removal added
PARTSTOBEINSTALLED
NEW Engine air inlet duct connection added
PARTSTOBEINSTALLED
Body parts in
stallation sequence additions and
modificatio n s . Also divided into sma ller topics
PARTSTOBEINSTALLED
Front fenders installation additions
PARTSTOBEIN
STALLED
Rear turn sign al lights installatio n
(Japan mode
ls)
PARTSTOBEINSTALLED
New shift sequence decal SM6 and SE6
(Japan mode
ls)
PARTSTOBEINSTALLED
NEW engine oil level verification procedure
FLUIDS
NEW recommended engine coolant
FLUIDS
Front tire pressure change
SETUP
New meter setup for drive belt tensio n
SETUP
Addition of procedure for setting cluster
language
SETUP
New remote horizontal adjuster, high beam
headlights (Japan models)
SETUP
All RT Models
Specifications pages removed, available on BOSSWeb or INFO CENTER
PREDELIVERY 2014-1 3 / 52

Can-Am Spyder RT Series Specifications

General

Transmission	6-speed semi-automatic with reverse
Rear Suspension	Swing arm with mono shock
Engine Type	Rotax 1330 ACE in-line 3-cylinder
Displacement	1330 cc
Front Suspension	Double A-arm with anti-roll bar
Front Brakes	2 x 270 mm discs with Brembo 4-piston fixed calipers
Rear Brake	270 mm disc with single-piston caliper
Power	115 hp (86 kW)
Torque	96 lb-ft (130 Nm)
Fuel System	Electronic Fuel Injection