EasyManuals Logo

Can-Am Spyder RT Series User Manual

Can-Am Spyder RT Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
UNCRATING
NOTE: The steps that follow describe two meth-
ods for lifting the front of the vehicle from the
crate base. The conventional method uses a hy-
draulic jack and the alternate method uses a chain
block. Use the proper method according to your
shop layout.
Conventional Method
1. Remove piece of wood located at the front of
the vehicle.
NOTE: The removed piece of wood can be used
to level the jack in the following step.
rbl2013-003-003_a
TYPICAL
1. Wood piece to remove
2. Install a floor jack with a piece of wood on top
to increase c ontact surface of jack pad.
rbl2013-003-004_a
TYPICAL - FRONT OF VEHICLE
1. Jack
2. Wood piece
3. Wood piece removed earlier
CAUTION Approach with care when vehi-
cle is on the jack as it may be unstable.
3. Lift the vehicle.
rbl2010-002-016
TYPICAL
NOTICE
Never lift vehicle by the suspension
arm.
Alternate M
ethod
1. Install proper straps with hooks on RH and LH
lateral supports of vehicle.
NOTE: Insert hooks through the holes in the
frame.
rbl2013-003-005_a
TYPICAL
1. Strap
2. Hook
3. Frame
2. Hook straps on an appropriate lifting kit.
3. Lift vehicle using a chain block.
NOTICE
Never lift vehicle by the suspension
arm.
Front Wheels Installation
1. Clean front and rear brake discs.
PREDELIVERY 2014-1 9 / 52

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Can-Am Spyder RT Series and is the answer not in the manual?

Can-Am Spyder RT Series Specifications

General IconGeneral
Transmission6-speed semi-automatic with reverse
Rear SuspensionSwing arm with mono shock
Engine TypeRotax 1330 ACE in-line 3-cylinder
Displacement1330 cc
Front SuspensionDouble A-arm with anti-roll bar
Front Brakes2 x 270 mm discs with Brembo 4-piston fixed calipers
Rear Brake270 mm disc with single-piston caliper
Power115 hp (86 kW)
Torque96 lb-ft (130 Nm)
Fuel SystemElectronic Fuel Injection

Related product manuals