Can-Am Spyder RT Series User Manual

UNCRATING
rbl2014-004-027_a
TYPICAL - LH SIDE
1. Sub-crate that contains front cargo module
rbl2014-004-028_a
SCREWS TO REMOVE, BOTH SIDES OF CARGO MODULE
SUB-CRATE
2. Remove protective foam sheet from vehicle.
rbl2010-002-005
3. Remove windshield from front wheels.
rbl2014-004-029_a
1. Windshield to remo ve
2. Cut tapes here
4. Remove front wheels from crate base.
rbl2014-004-030_a
TYPICAL
1. Front w
heels
2. Cut transport strap here
5. Remove shipping covers from fenders.
rbl2014-004-031_a
1. Fender covers to remove
6 / 52 2014-1 PREDELIVERY

Can-Am Spyder RT Series Specifications

General

Transmission	6-speed semi-automatic with reverse
Rear Suspension	Swing arm with mono shock
Engine Type	Rotax 1330 ACE in-line 3-cylinder
Displacement	1330 cc
Front Suspension	Double A-arm with anti-roll bar
Front Brakes	2 x 270 mm discs with Brembo 4-piston fixed calipers
Rear Brake	270 mm disc with single-piston caliper
Power	115 hp (86 kW)
Torque	96 lb-ft (130 Nm)
Fuel System	Electronic Fuel Injection