C&S CSPF-100 User Manual

In Edit /View setting option user can view or edit the settings after entering the password (Default : P200).
Refer Programmable Parameters (Advance Setting) on Page 8 & 9 for detailed information.
ANEL
T_oF
STEP F-oN
oURC
UNDC
F-oF
UNoN
Bank Swtich Off DelayPhase Angle
oCo UCo
Under
Compensation
Over
Compensation
Nominal Voltage
CAP
No. of Cap.
Bank used
T-HI
Temp. High
Setting
Fan On Temp.
T-Lo
Temp. Low Setting
Under current Setting
Over current Setting
Fan Off Temp.
CAPCAP
Cap. Bank
ON/OFF selection
for Over current trip
Cap. Bank
ON/OFF selection
for Over Voltage trip
Cap. Bank
ON/OFF selection
for Under current trip
Cap. Bank
ON/OFF selection
for High Temp. trip
oURU
Over Voltage
setting
DELY
CAP
Return to Prev Menu
DELY
Temp. High Trip
Delay
DELY
Over current
Delay
Under current
Delay
Over voltage
Delay
DELY
A2
Sub Menu Screens for A2
In Edit /View setting option user can view or edit the settings after entering the password (Default : P100).
Refer Programmable Parameters (Basic Setting) on Page 8 for detailed information.
Cos
Target Power Factor
C_k
CTR T_oN
External CT Ratio Bank Switch On delay
Switching program
selection
C/k Ratio
A1
Return to Prev Menu
Sub Menu Screens for A1
EBAC
EBAC
PGMS
Short Press Short Press
Short Press
Scroll Keys
Scroll Keys
To view a particular parameters set value, Press key. To exit view selection Press --> and then press
key.
EBAC
Short Press
Short Press
e.g. : Ext. CT 200/5
Ctr = 40
11

C&S CSPF-100 Specifications

General

Brand	C&S
Model	CSPF-100
Category	Controller
Language	English