34
MAINTENANCE AND CLEANING
1. Remove the power plug from electrical socket.
2. Do not clean inner parts, panel, trays and other parts of the product
with hard tools such as bristle brush, wire wool or knife. Do not use abrasive,
scratching materials or detergent.
3. Rinse after wiping the parts at inner parts of the product with soapy
cloth, then dry thoroughly with a soft cloth.
4. Clean glass surfaces with special glass cleaning material.
5. Do not clean your product with steam cleaners.
6. Never use combustibles like acid, thinner and gas while cleaning
your product.
7. Do not wash any part of the product in dishwasher.
8. Use potassium stearate (soft soap) for dirt and stains.
Cleaning Oven Glass
Lift by pressing on plastic latches on left and right side as shown
in gure 20 and pulling the profile toward yourself as in figure 21.
Glass is released after prole is removed as shown in gure 22. Remove
the released glass by pulling toward yourself carefully. Outer glass is xed
to oven door prole. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that prole
is seated properly in place.
Figure 20 Figure 21 Figure 22
GB
To Next Page
Loading...
