Canon AE-1 PROGRAM - Page 12

Open the battery chamber
cover using the viewfinder
cover.
Load a
new battery so that its
terminals are in the directions
indicated by the diagram in-
side the battery chamber.
The camera
will not function if
the battery
is loaded incor-
rectly.
The AE-1 PROGRAM will not
work without a battery. We re-
commend carrying a spa re bat-
tery.
12
Insert the negative end first.
Then push
down and insert
the positive end.
Close the
chamber cover.
Do not touch the battery ter-
minals. Wipe them and the
camera contacts with a clean,
dry cloth before loading to pre-
vent
poor conta ct from dirt .