32
About Log Files
The results of recognition performed with the barcode detection function or OCR function can be saved as a
log file in the CSV format.
To save a log file, select the Write LogFile check box in the appropriate tab of the Barcode/OCR LogSetting
dialog box shown below, and then specify a destination log file.
Note
• The barcode tab is activated when the scanner supports barcode scanning.
• If editing (addition, deletion, replacement) is performed on the image file page for which a log file is saved,
the corresponding log file is also edited. In this case, depending on the size of the log file, it may take a
while for editing of the log file to finish.
To Next Page
Loading...
