217
The date/time (back-up) battery maintains the camera’s date and time.
Its service life is about 5 years. If you turn on the power and the date/
time is reset, replace the back-up battery with a new CR1616 lithium
battery as described below.
The date/time setting will also be reset, so be sure to set the
correct date/time (p.42).
1
Set the power switch to <2>.
2
Unscrew the battery holder
screw.
Use a small Philips screwdriver.
Be careful not to lose the screw.
3
Take off the battery holder.
Push out the battery in direction d.
4
Replace the battery in the battery
holder.
Make sure the battery is in the proper
+ – orientation.
5
Tighten the battery holder screw.
Replacing the Date/Time Battery
For the date/time battery, be sure to use a CR1616 lithium battery.
To Next Page
Loading...
