12
This section explains the basic operation of the wireless LAN functions
and how to register a nickname (for identification).
Follow the procedures below.
Operation Flowchart
Set [Wi-Fi/NFC] to [Enable].
(Steps 1 and 2 on page 14)
When this setting is selected for the first time, a
screen to register a nickname is displayed.
Register a nickname. (p.20)
Set the camera’s nickname. Enter any
characters between 1 to 14 characters in
length, such as your name.
Be sure to set a nickname as otherwise you
cannot go to the wireless LAN settings
screen.
Display the [Wi-Fi function] screen.
(Steps 3 and 4 on pages 14-15)
The camera’s wireless LAN settings are set
from the [Wi-Fi function] screen.
For further settings, see “Easy Connection” or
“Advanced Connection”.
Easy Connection (p.23)
Connect the camera directly to the
device.
Advanced Connection (p.65)
Connect using a Wi-Fi access point.
To Next Page
