89
You can specify images viewable from a smartphone by operating the
camera. Images can be specified during connection settings or
after the connection is terminated.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [q].
Select [q] (Connect to smartphone)
and press <0>.
3
Select [Review/change settings].
Select [Review/change settings]
and press <0>.
4
Select [Viewable imgs].
Select [Viewable imgs] and press
<0>.
Specifying Viewable Images
When viewable images are specified, remote shooting is not possible.
When reconnecting to a smartphone, check the viewable images setting
before establishing a connection.
To Next Page
Loading...
