98
The camera can reconnect to a printer for which connection settings
have been registered.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [l].
Select [l] (Print from Wi-Fi printer)
and press <0>.
3
Establish a connection.
Select [Connect] and press <0>.
On the confirmation dialog, select
[OK].
X The camera will reconnect to the
printer.
When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Reconnecting
To Next Page
