Canon EOS 760D - Page 72

72
Connection via WPS (PBC Mode)
4
Select [WPS (PBC mode)].
Press the <W> <X> keys to select
[WPS (PBC mode)], then press
<0>.
Select [OK] and press <0> to go to
the next screen.
5
Connect to the access point.
Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
Select [OK] and press <0> to
establish a connection with the
access point.
X When a connection with the access
point is established, the next screen
is displayed.
6
Select [Auto setting].
Press the <W> <X> keys to select
[Auto setting], then press <0>.
Select [OK] and press <0> to
display the setting screen for the
Wi-Fi function selected in step 2
(p.73).
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 160.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that IP addresses and related settings are assigned and configured
automatically.