22: No response from DNS server
What to check on the camera
On the camera, does the DNS server's IP address setting match the server's
actual address?
• Set the IP address to [Manual setting]. Then, on the camera, set the IP address
that matches the address of the DNS server used ( ).
What to check on the DNS server
Is the power of the DNS server on?
• Turn on the DNS server.
Are the DNS server settings for IP addresses and the corresponding names
correct?
• On the DNS server, make sure IP addresses and the corresponding names are
entered correctly.
Is the DNS server working correctly?
• Check the DNS server settings to make sure it is working correctly as a DNS server.
• If applicable, ask your network administrator to ensure the DNS server is available.
What to check on the network as a whole
Does the network that you are trying to connect to via Wi-Fi include a router or
similar device that serves as a gateway?
• If applicable, ask your network administrator for the network gateway address and
set it on the camera ( , ).
• Make sure that the gateway address setting is correctly entered on all network
devices including the camera.
615
To Next Page
