Canon FS1 - System Setup (Speaker Volume, Beep, Etc.)

Additional Information
78
[START WEEK]: Select the day on which the week starts for the calendar display ( 36).
[DEMO MODE]: The demonstration mode displays the camcorder's main features. It
starts automatically when the camcorder is powered with the compact power adapter if
you leave it turned on for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn off the
camcorder.
System Setup (Speaker Volume, Beep, etc.)
SYSTEM SETUP
[BATTERY INFO]: Displays a screen where you can verify the battery charge (as a
percentage) and the remaining recording time ( , mode) or playback time ( ,
mode).
[WL.REMOTE]: Allows the camcorder to be operated with the wireless controller.
[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-
timer countdown, etc.
[POWER SAVE]: In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [AUTO POWER OFF] will appear.
• In standby mode, the camcorder will shut off after the time selected for the [QUICK
START] setting.
• The Power Save mode cannot be set while the compact power adapter is connected to
the camcorder.
Menu item Setting options
[BATTERY INFO] – zzzz –
[WL.REMOTE] [ON], [ OFF ] zzzz –
[BEEP] [ HIGH VOLUME],
[ LOW VOLUME], [ OFF]
zzzz –
[POWER SAVE] [ON], [ OFF] zzzz –
[QUICK START] [ OFF], [ 10 min],
[ 20 min], [ 30 min]
zz –––
[SPEAKER VOL.] – – z ––
[TV TYPE] [ NORMAL TV], [ WIDE TV] ––zz –
[USB SETTING] [ DVD BURNER], [ PC/PRINTER],
[ CONNECT&SET]
––zz –
[ADD TO DISC] [ALL SCENES], [REM.SCENES],
[PLAYLIST]
––z –66
[ALL IMAGES], [ TRANS.ORD] – – – z 66
[IMG NUMBERS] [ RESET], [CONTINUOUS] – z – z –
[FIRMWARE] – – – – z –