Adjusting the feed amount
6. Examine test pattern A for band adjustment. Determine the pattern in which streaks are least
noticeable.
Note
• If streaks seem least noticeable in two patterns but you cannot decide which one is better , choose an
intermediate value. For example, choose 1 1 if you cannot decide whether pattern 10 or 12 is better .
7. Press ▲ or ▼ to display the number selected in step 6, and then press the OK button.
T est pattern B is printed for band adjustment.
8. Examine test pattern B for band adjustment. Determine the pattern in which streaks are least
noticeable.
9. Press ▲ or ▼ to display the number selected in step 8, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Adjustments for Better Print Quality 581
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
