Canon imagePROGRAF iPF6000S User Manual

Control Panel
First Level
Second Level
Third Level Fourth Level
Fifth Level
User Name
Page Count
Job Status
Print Start T ime yyyy/mm/dd
hh:mm
Print End T ime yyyy/mm/dd
hh:mm
Print T ime sec.
Print Size xxxxxxxxsq.mm
Media T ype
Interface
Ink Consumed xx.x ml
HDD Information HDDSpace
*1: A vailable only if a roll is loaded.
*2: A vailable only if Chk Remain.Roll is On .
*3: A vailable if Feed Priority is Automatic or Print Length .
*4: Not displayed if IP Mode is Manual .
*5: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .104) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Conguration T ool . See the Media Conguration T ool Guide
(Windows) or Media Conguration T ool Guide (Macintosh).
*6: Not displayed if NetW are is Off .
*7: Not displayed if Auto Detect is On .
*8: Follows the setting in Date Format .
*9: A vailable after you have used Advanced Adj. in Auto Head Adj. once.
*10: Not displayed if IP Mode is Automatic .
*1 1: Follows the setting in Length Unit .
*12: Select Y es to restore Paper Details to the factory default values. Any paper type settings you
have changed on the Control Panel of the printer are restored to the original values when you install
the printer driver from the User Software CD-ROM or if you update paper information by using the
Media Conguration T ool .
Caution
• Only the following menus are displayed during printing.
• Menu Durng Prtng
Choose this menu to display Head Cleaning , Fine Band Adj. , and Information .
• Job Mgmt Menu
Choose this menu to display Job Management .
Printer Parts 51
Downloaded from ManualsPrinter.com Manuals

Canon imagePROGRAF iPF6000S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6000S
Category	Printer
Language	English