Handling rolls
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper jam. is shown on the Display Screen of the Control Panel .
Remove the jammed paper as follows.
Note
• For instructions on removing a paper jam from a roll if the scrap of paper remains in the Paper Feed
Slot, see “Clearing Jammed Paper (Paper Feed Slot)”. (→P .130)
1. Open the Roll Feed Unit Cover . Use a store-bought cutter or the like to cut the paper of the
loaded roll.
Caution
• When cutting paper , be careful to avoid scratching the printer .
2. Press Load/Eject button.
3. Remove the jammed paper .
• If paper is jammed inside the T op Cover
1. Open the T op Cover and move the Carriage to the side.
Handling Paper 127
To Next Page
Loading...
Need help?
General