Printer Driver
Ambient Light Adjust
When you select By selecting a chart number in Setting Method
Setting Item Description
A Setting Method
Y ou can choose conguration based on the printed Chart or based on
using the i1 colorimeter .
B Print Chart Click to start the Light Source Check T ool , for printing Charts . The Light
Source Check T ool must be installed to use this function.
C Chart Number
In Chart , select the number of the pattern with your desired colors.
D Color T emperature Enter the Color T emperature measured during monitor calibration.
Displayed when the Matching Method is set to Monitor Matching on
the Matching sheet.
E Illuminance Enter the Illuminance measured during monitor calibration. Displayed
when the Matching Method is set to Monitor Matching on the Matching
sheet.
When you select By entering values directly in Setting Method
Setting Item
Description
A Setting Method
Y ou can choose conguration based on the printed Chart or based on
using the i1 colorimeter .
B Lighting Source T ype Select the light source measured using the i1 colorimeter .
D Color T emperature Enter the Color T emperature measured using the i1 colorimeter .
E Illuminance Enter the Illuminance measured using the i1 colorimeter .
Displayed when the Matching Method is set to Monitor Matching on
the Matching sheet.
Note
• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P .206)
Windows Software 417
To Next Page
Loading...
Need help?
General