Canon imagePROGRAF iPF6200 - Page 547

Hard Disk
3. In the Set/Register User ’ s Inbox dialog box, specify the password and click OK .
• Set Password : Select the check box.
• Password : Enter the password. (This eld is limited to four digits in the range 0001-9999.)
• Conrmation Number : Re-enter the password to conrm it.
For details, refer to the RemoteUI help.
Using imagePROGRAF Status Monitor (W indows)
1. On the Hard Disk sheet, select a listed personal box for a password and click Open .
Note
• Enter a password if one has been set for the personal box.
Hard Disk 533