Problems Regarding Paper
Clearing Jammed Paper from the T ray
If a sheet loaded manually becomes jammed, Paper jam. is shown on the Display Screen of the Control
Panel . Remove the jammed paper as follows.
1. Press Load/Eject .
2. Remove the jammed paper .
• If paper is jammed inside the T op Cover
1. Open the T op Cover and move the Carriage to the side manually .
2. Clear any jammed paper from inside the T op Cover .
After removing the paper , make sure there are no other scraps of paper in the printer .
3. Close the T op Cover .
T roubleshooting 661
To Next Page
Loading...
