Dividing an Original into Equal Sections and Enlarging Each Section on a Separate
Copy Sheet (Image Separation)
2-39
Useful Copy Functions
2
Dividing an Original into Equal Sections and Enlarging
Each Section on a Separate Copy Sheet
(Image Separation)
This mode automatically divides an original into equal sections and copies each section in
an enlarged form on a separate sheet of paper.
The following four types of Image Separation features are available: 1 to 2 (1-sided and 2-
sided copies), and 1 to 4 (1-sided and 2-sided copies).
IMPORTANT
• When the machine is operating in the Image Separation mode, you cannot use the Entire Image,
Two-sided, Two-page Separation, Cover/Sheet Insertion, Booklet, Transparency Interleaving,
Saddle Stitch, Frame Erase, Different Size Originals, Image Combination, or Image Repeat
modes.
• Originals copied in the Image Separation mode must all be the same size. You cannot use the
Different Size Originals mode in combination with the Image Separation mode.
• Place the original on the platen glass. You cannot copy the original in the Image Separation mode
from the feeder.
NOTE
•
The enlargement ratio is automatically set to match the designated paper size.
■ 1 to 2
Divides a one-sided original into two equal sections and outputs the sections in an
enlarged form as two 1-sided copies or one 2-sided copy.
NOTE
•
You can place LTR-size originals horizontally or vertically when using this feature. When placed
vertically, each page is divided into upper and lower sections.
2
1
1
1
2
Original Copies
or
To Next Page
Loading...
Need help?
General
